Imagine this: you've studied the road rules, practised for months, and are finally ready to take your heavy vehicle driving test. You confidently approach the intersection, waiting for the traffic lights to turn green.

As soon as they do, you take off, driving straight ahead. Everything seems to be going well until you realise that you're in the wrong lane. What seemed like a small mistake has now led to an unfortunate outcome - you've failed the test.

This is exactly what happened to an Australian driver who shared his disappointing experience on Reddit. In a video that has since gone viral, the driver can be seen driving through an intersection in Townsville, Queensland, seemingly following the correct lane.

However, as the road turns from a two-lane to a three-lane road on the other side of the intersection, the driver fails to shift into the new right-hand lane on the opposite side of the road and remains in the centre lane instead.

​

After sharing the video, fellow Reddit users chimed in, some understanding the examiner's decision to fail the driver. One commenter stated, 'Yeah, starts in the right-hand lanes, finishes in the middle. That's a lane change mid-intersection.'

Despite acknowledging his mistake, the driver expressed his frustration, 'I just fail to see how that can be a “critical driving error” and fail my whole test for a mistake that is easy to make. I literally just drove in a straight line.'

It's easy to relate to the driver's frustration and disappointment, especially when you've put in the effort and time to prepare for a test. As drivers, we understand the importance of following the rules of the road and the significance of even the smallest errors.

But sometimes, mistakes happen, and it's important to take them as lessons and improve our driving skills continually.

A Google Maps view of the controversial Townsville, Queensland, intersection. Credit: Google Maps.

It's not uncommon to find ourselves in situations where road design can be confusing or unclear, and it seems that many Reddit users sympathised with the driver's predicament.

Some suggested that the intersection was to blame for its unclear lane markings and signage. One commenter wrote, 'I think it's more a case of bad road design. It's ambiguous whether the added lane should be on the left or right (evident by you and the instructor disagreeing).'

Another user suggested that clearer markings were needed, 'They really should add dotted lines through the intersection to remove any doubt as to which lane goes where in cases like this where there is a different number of lanes on each side of the intersection.'

However, not everyone agreed with the driver's argument that the error was trivial. Some users believed that the examiner made the right decision in failing the driver for the mistake, with one commenter expressing, 'While it is unfair, I would say that it is a critical driving error. Screwing up lanes can cause serious accidents.'

Regardless of differing opinions, this serves as a cautionary tale to stay vigilant while approaching intersections and to always adhere to the rules of the road. We must keep in mind that any mistakes while driving can lead to serious consequences.

Additionally, it's crucial to continue advocating for better road designs and improvements to ensure safer driving conditions for everyone. Clear signage and markings can go a long way in preventing confusion and accidents on the road.

Key Takeaways

• A Reddit user failed his heavy vehicle driving test in Townsville, Queensland after he failed to change lanes in an intersection.
• Some users sympathised with the driver, suggesting that the intersection's road design was confusing and could have benefited from clearer lane markings and signage.
• Others believed that the examiner made the right decision in failing the driver, emphasising the importance of following the rules of the road and avoiding even minor mistakes while driving.

Aside from this incident, there was another story that recently made waves on social media. A dashcam video shared by a Melbourne driver shows a white SUV entering the left lane of a major road from a side street, almost colliding with a Honda HR-V in the right lane. While it seems like a clear-cut case of right-of-way, opinions differed among commenters, leading to a heated online debate.

Click this link to read the full story and join the discussion!

In conclusion, this incident highlights the importance of remaining vigilant and following the rules of the road while driving. Even minor mistakes can have major repercussions, and it's crucial to stay aware of one's surroundings and make necessary adjustments.

At the same time, advocating for better road designs and improvements to ensure safer driving conditions for everyone is equally important. By working together, we can minimise the risks and ensure that our roads are safe and accessible to all.

Make sure you brush up on your road rules so you can make informed decisions while driving. Credit: Unsplash/Rolando Garrido.

What do you think about the intersection's road design and its impact on the driver's mistake? Do you believe that the examiner's decision to fail the driver was fair, or do you think it was too harsh?

How do you ensure that you remain vigilant and avoid making mistakes while driving, especially in unfamiliar or ambiguous road conditions? Let us know your thoughts and insights in the comments below.

Stay safe on the roads always, members!

 

[Keswickian]

Yes, I'm afraid that's the rules. I nearly had a collision once with somebody who did exactly that. I approached the intersection from the left lane and continued into the centre lane on the other side because that seemed the straightest line. A car tried to enter the same lane from my right and we came very close to colliding.
If this man had somebody on his left during his test and came that close to colliding, then yes - FAIL!

 

[Thecheesequeen]

It seems to me that’s a poorly designed intersection. I would have done the same thing, especially if the intersection was unfamiliar to me.

 

[gmdarts]

Imagine this: you've studied the road rules, practised for months, and are finally ready to take your heavy vehicle driving test. You confidently approach the intersection, waiting for the traffic lights to turn green.

As soon as they do, you take off, driving straight ahead. Everything seems to be going well until you realise that you're in the wrong lane. What seemed like a small mistake has now led to an unfortunate outcome - you've failed the test.

This is exactly what happened to an Australian driver who shared his disappointing experience on Reddit. In a video that has since gone viral, the driver can be seen driving through an intersection in Townsville, Queensland, seemingly following the correct lane.

However, as the road turns from a two-lane to a three-lane road on the other side of the intersection, the driver fails to shift into the new right-hand lane on the opposite side of the road and remains in the centre lane instead.

​

After sharing the video, fellow Reddit users chimed in, some understanding the examiner's decision to fail the driver. One commenter stated, 'Yeah, starts in the right-hand lanes, finishes in the middle. That's a lane change mid-intersection.'

Despite acknowledging his mistake, the driver expressed his frustration, 'I just fail to see how that can be a “critical driving error” and fail my whole test for a mistake that is easy to make. I literally just drove in a straight line.'

It's easy to relate to the driver's frustration and disappointment, especially when you've put in the effort and time to prepare for a test. As drivers, we understand the importance of following the rules of the road and the significance of even the smallest errors.

But sometimes, mistakes happen, and it's important to take them as lessons and improve our driving skills continually.

View attachment 17231

A Google Maps view of the controversial Townsville, Queensland, intersection. Credit: Google Maps.

It's not uncommon to find ourselves in situations where road design can be confusing or unclear, and it seems that many Reddit users sympathised with the driver's predicament.

Some suggested that the intersection was to blame for its unclear lane markings and signage. One commenter wrote, 'I think it's more a case of bad road design. It's ambiguous whether the added lane should be on the left or right (evident by you and the instructor disagreeing).'

Another user suggested that clearer markings were needed, 'They really should add dotted lines through the intersection to remove any doubt as to which lane goes where in cases like this where there is a different number of lanes on each side of the intersection.'

However, not everyone agreed with the driver's argument that the error was trivial. Some users believed that the examiner made the right decision in failing the driver for the mistake, with one commenter expressing, 'While it is unfair, I would say that it is a critical driving error. Screwing up lanes can cause serious accidents.'

Regardless of differing opinions, this serves as a cautionary tale to stay vigilant while approaching intersections and to always adhere to the rules of the road. We must keep in mind that any mistakes while driving can lead to serious consequences.

Additionally, it's crucial to continue advocating for better road designs and improvements to ensure safer driving conditions for everyone. Clear signage and markings can go a long way in preventing confusion and accidents on the road.

Key Takeaways

• A Reddit user failed his heavy vehicle driving test in Townsville, Queensland after he failed to change lanes in an intersection.
• Some users sympathised with the driver, suggesting that the intersection's road design was confusing and could have benefited from clearer lane markings and signage.
• Others believed that the examiner made the right decision in failing the driver, emphasising the importance of following the rules of the road and avoiding even minor mistakes while driving.

Aside from this incident, there was another story that recently made waves on social media. A dashcam video shared by a Melbourne driver shows a white SUV entering the left lane of a major road from a side street, almost colliding with a Honda HR-V in the right lane. While it seems like a clear-cut case of right-of-way, opinions differed among commenters, leading to a heated online debate.

Click this link to read the full story and join the discussion!

In conclusion, this incident highlights the importance of remaining vigilant and following the rules of the road while driving. Even minor mistakes can have major repercussions, and it's crucial to stay aware of one's surroundings and make necessary adjustments.

At the same time, advocating for better road designs and improvements to ensure safer driving conditions for everyone is equally important. By working together, we can minimise the risks and ensure that our roads are safe and accessible to all.

View attachment 17232

Make sure you brush up on your road rules so you can make informed decisions while driving. Credit: Unsplash/Rolando Garrido.

What do you think about the intersection's road design and its impact on the driver's mistake? Do you believe that the examiner's decision to fail the driver was fair, or do you think it was too harsh?

How do you ensure that you remain vigilant and avoid making mistakes while driving, especially in unfamiliar or ambiguous road conditions? Let us know your thoughts and insights in the comments below.

Stay safe on the roads always, members!

 

[gmdarts]

I went for my tst afer being disqualified for a while According to what the tester failed me on you no longer use your side mirrors to check for traffis before you change lanes you have to take your eyesoff the road ahead and turn your head to chheck for taffic coming in th lane you are told to change into I saw traffic coming using the mirrors twice and was told again to change lanes which i could not do so without causing an accident abd the tester also failed me for that too Maybe we do not need rear vision mirrors anymore (ha ha)Wrote to the relevant authority fro clarification too Am still waiting for them to return my feedback(will not hold my breath though}

 

[Shane/#]

Imagine this: you've studied the road rules, practised for months, and are finally ready to take your heavy vehicle driving test. You confidently approach the intersection, waiting for the traffic lights to turn green.

As soon as they do, you take off, driving straight ahead. Everything seems to be going well until you realise that you're in the wrong lane. What seemed like a small mistake has now led to an unfortunate outcome - you've failed the test.

This is exactly what happened to an Australian driver who shared his disappointing experience on Reddit. In a video that has since gone viral, the driver can be seen driving through an intersection in Townsville, Queensland, seemingly following the correct lane.

However, as the road turns from a two-lane to a three-lane road on the other side of the intersection, the driver fails to shift into the new right-hand lane on the opposite side of the road and remains in the centre lane instead.

​

After sharing the video, fellow Reddit users chimed in, some understanding the examiner's decision to fail the driver. One commenter stated, 'Yeah, starts in the right-hand lanes, finishes in the middle. That's a lane change mid-intersection.'

Despite acknowledging his mistake, the driver expressed his frustration, 'I just fail to see how that can be a “critical driving error” and fail my whole test for a mistake that is easy to make. I literally just drove in a straight line.'

It's easy to relate to the driver's frustration and disappointment, especially when you've put in the effort and time to prepare for a test. As drivers, we understand the importance of following the rules of the road and the significance of even the smallest errors.

But sometimes, mistakes happen, and it's important to take them as lessons and improve our driving skills continually.

View attachment 17231

A Google Maps view of the controversial Townsville, Queensland, intersection. Credit: Google Maps.

It's not uncommon to find ourselves in situations where road design can be confusing or unclear, and it seems that many Reddit users sympathised with the driver's predicament.

Some suggested that the intersection was to blame for its unclear lane markings and signage. One commenter wrote, 'I think it's more a case of bad road design. It's ambiguous whether the added lane should be on the left or right (evident by you and the instructor disagreeing).'

Another user suggested that clearer markings were needed, 'They really should add dotted lines through the intersection to remove any doubt as to which lane goes where in cases like this where there is a different number of lanes on each side of the intersection.'

However, not everyone agreed with the driver's argument that the error was trivial. Some users believed that the examiner made the right decision in failing the driver for the mistake, with one commenter expressing, 'While it is unfair, I would say that it is a critical driving error. Screwing up lanes can cause serious accidents.'

Regardless of differing opinions, this serves as a cautionary tale to stay vigilant while approaching intersections and to always adhere to the rules of the road. We must keep in mind that any mistakes while driving can lead to serious consequences.

Additionally, it's crucial to continue advocating for better road designs and improvements to ensure safer driving conditions for everyone. Clear signage and markings can go a long way in preventing confusion and accidents on the road.

Key Takeaways

• A Reddit user failed his heavy vehicle driving test in Townsville, Queensland after he failed to change lanes in an intersection.
• Some users sympathised with the driver, suggesting that the intersection's road design was confusing and could have benefited from clearer lane markings and signage.
• Others believed that the examiner made the right decision in failing the driver, emphasising the importance of following the rules of the road and avoiding even minor mistakes while driving.

Aside from this incident, there was another story that recently made waves on social media. A dashcam video shared by a Melbourne driver shows a white SUV entering the left lane of a major road from a side street, almost colliding with a Honda HR-V in the right lane. While it seems like a clear-cut case of right-of-way, opinions differed among commenters, leading to a heated online debate.

Click this link to read the full story and join the discussion!

In conclusion, this incident highlights the importance of remaining vigilant and following the rules of the road while driving. Even minor mistakes can have major repercussions, and it's crucial to stay aware of one's surroundings and make necessary adjustments.

At the same time, advocating for better road designs and improvements to ensure safer driving conditions for everyone is equally important. By working together, we can minimise the risks and ensure that our roads are safe and accessible to all.

View attachment 17232

Make sure you brush up on your road rules so you can make informed decisions while driving. Credit: Unsplash/Rolando Garrido.

What do you think about the intersection's road design and its impact on the driver's mistake? Do you believe that the examiner's decision to fail the driver was fair, or do you think it was too harsh?

How do you ensure that you remain vigilant and avoid making mistakes while driving, especially in unfamiliar or ambiguous road conditions? Let us know your thoughts and insights in the comments below.

Stay safe on the roads always, members!

Typical Queensland 20 year's behind the rest of the country

 

[Vet543]

Yes, I'm afraid that's the rules. I nearly had a collision once with somebody who did exactly that. I approached the intersection from the left lane and continued into the centre lane on the other side because that seemed the straightest line. A car tried to enter the same lane from my right and we came very close to colliding.
If this man had somebody on his left during his test and came that close to colliding, then yes - FAIL!

I agree with this reply, it is definitely a fail. In Brisbane, the very same type of intersection and I did what the learner did .. It seemed to be a straight line through the inteersection. I ALMOST wipe a motor cycle rider by going straight ahead. I believe he changed lanes IN THE INTERSECTION which is illegal but I was also wrong because we are required to be observant and I wasn't. As for the driving test, IF HE DIDN't disrupt traffic or create an accident I think he may have had a number of accrued points against him. Not saying he did but it does seem paltry to deny a licence for ONE FAULT?
I would deny a licence for ONE error _ running a red light, failing to stop for an elder or any person on a pededstrian ctrossing. for side swiping another vehicle etc. exceeding the speed limit 40KPH in a school zone, when required to stay within the limit. Lane changing without a signal in very light traffic would wipe half of his allowed error points. Lies were inadequate. (Report to the council)..Remember when making a Left or Right hand turn . You may select an appropriat lane IF IT IS CLEAR but not on dual lane turns.

 

[Vet543]

Typical Queensland 20 year's behind the rest of the country

Not Typical Queensland at all. Try NT, WA or even SA, although I do agree Qld Signage has a lot to be desired.

 

[Terence Ashton]

as an Ex driving instructor,,, the change in the said road, going from a 2 lane into a three lane joining road, providing you have given indication of your intention to other rd users, you may chose either the middle lane or the outer lane, but as a heavy vehicle, it would be advised to take the route he did going to the middle lane, leaving smaller and faster vehicle to take the outer fast lane..

 

[PepeLePew]

My son failed his first driving test because as he came up to a set of traffic lights that were green and he was about a cars length from the lights when they turned amber. He had been taught only to stop if it was safe to do so and he honestly believed that slamming on his breaks that close to the lights with a car behind him was dangerous so he went to continue through the lights but the driving tester (a woman) used her brakes instead to come to a stop and he was automatically failed. The guy who had been giving my son driving lessons for a few months couldn't comprehend her decision. A month later he took the test again with a male tester and passed with flying colours. At the end the tester asked him why he failed the first time and upon being told he was also in complete disbelief. He told my son that he was extremely lucky that the driver behind him had been paying attention and travelling far enough behind otherwise there could have been a nasty accident where someone may have been severely injured or lost their life.

 

[Keswickian]

as an Ex driving instructor,,, the change in the said road, going from a 2 lane into a three lane joining road, providing you have given indication of your intention to other rd users, you may chose either the middle lane or the outer lane, but as a heavy vehicle, it would be advised to take the route he did going to the middle lane, leaving smaller and faster vehicle to take the outer fast lane..

I'm sorry but I disagree. If you approach the intersection in the right hand (outside) lane, the edge of the road will be on your right. When you exit the intersection, the edge of the road should still be on your right so you still need to be in the right hand (outside) lane. Otherwise, you will have changed lanes in the intersection. There is no opportunity for any other vehicles to take that outside lane.
On the other hand, any vehicle on your left will be in the second lane from the right, and will expect still to be in second lane from the right as he leaves the intersection (ie the middle lane).
The fact that you are a former instructor suggests that this a grey area and should be clarified by the relevant authorities and explained in the Road Users Handbook.

 

[Vet543]

I'm sorry but I disagree. If you approach the intersection in the right hand (outside) lane, the edge of the road will be on your right. When you exit the intersection, the edge of the road should still be on your right so you still need to be in the right hand (outside) lane. Otherwise, you will have changed lanes in the intersection. There is no opportunity for any other vehicles to take that outside lane.
On the other hand, any vehicle on your left will be in the second lane from the right, and will expect still to be in second lane from the right as he leaves the intersection (ie the middle lane).
The fact that you are a former instructor suggests that this a grey area and should be clarified by the relevant authorities and explained in the Road Users Handbook.

Sorry Terence, I agree with Loads..I was a driving instructor and a Tester for a period.
I never allowed my student to change lanes in the middle of an intersection. The addition of a lane on the exit road become a center lane and the driver should continue in the right lane. He must have needed the right lane to make a further right turn or to veer off on another highway. Selecting the wrong lane is a major cause of accident when leaving a roundabout or intersection.
That heavy vehickle should have been in the left lane before entering the intersection.
BTW, my average for students getting a first test licence was 99% .. Main Roads employed me to conduct the Defensive Driving Course for drivers ordered by the courts to attend before getting their licences back. Very soon we are ALL going to have a test of some kind when appying for a Licence Renewal. I had a heavy duty licence for everything barring a B-Double.
I drove Articulated public Transport in Canberra for 10 years and Commonwelth cars before the union upgraded the drivers union tickets, Never once did I get a ticket or a reprimand for my driving. Taxi Drivers would pay me to teach their learner cabbies in Canberra.
So I think I may have a little experience to advise drivers with.
This actual situation was never in any handbook that I read, even though it should be.
If that driver did not lose any points in that test other than that intersection, I think he would be able to appeal.
Very rarely do appeals work out but it sets things up for the next person, as I think that tester does that intentionally knowing that it is not covered in the handbooks. If it is not covered in the handbooks it cannot be disputed by higher authorities, because it become a simple "matter of opinion".
Enough said.

 

[Vet543]

My son failed his first driving test because as he came up to a set of traffic lights that were green and he was about a cars length from the lights when they turned amber. He had been taught only to stop if it was safe to do so and he honestly believed that slamming on his breaks that close to the lights with a car behind him was dangerous so he went to continue through the lights but the driving tester (a woman) used her brakes instead to come to a stop and he was automatically failed. The guy who had been giving my son driving lessons for a few months couldn't comprehend her decision. A month later he took the test again with a male tester and passed with flying colours. At the end the tester asked him why he failed the first time and upon being told he was also in complete disbelief. He told my son that he was extremely lucky that the driver behind him had been paying attention and travelling far enough behind otherwise there could have been a nasty accident where someone may have been severely injured or lost their life.

I certainly agree Pepe, ONE CAR LENGTH is approximately 3 meters .. I could jump about that far. Is it possible that she saw a dangerous situation arising in that intersection?
Or maybe there might have been a little graft somewhere. Just kidding... but I had heard other instructors mention similiar.
I don't think I would spend a lot time disputing with her. Any chances of winning would add up to NIL. The best solution is to install a safety dash cam by Navman, one that records the speed etc.

 

[POG]

Imagine this: you've studied the road rules, practised for months, and are finally ready to take your heavy vehicle driving test. You confidently approach the intersection, waiting for the traffic lights to turn green.

As soon as they do, you take off, driving straight ahead. Everything seems to be going well until you realise that you're in the wrong lane. What seemed like a small mistake has now led to an unfortunate outcome - you've failed the test.

This is exactly what happened to an Australian driver who shared his disappointing experience on Reddit. In a video that has since gone viral, the driver can be seen driving through an intersection in Townsville, Queensland, seemingly following the correct lane.

However, as the road turns from a two-lane to a three-lane road on the other side of the intersection, the driver fails to shift into the new right-hand lane on the opposite side of the road and remains in the centre lane instead.

​

After sharing the video, fellow Reddit users chimed in, some understanding the examiner's decision to fail the driver. One commenter stated, 'Yeah, starts in the right-hand lanes, finishes in the middle. That's a lane change mid-intersection.'

Despite acknowledging his mistake, the driver expressed his frustration, 'I just fail to see how that can be a “critical driving error” and fail my whole test for a mistake that is easy to make. I literally just drove in a straight line.'

It's easy to relate to the driver's frustration and disappointment, especially when you've put in the effort and time to prepare for a test. As drivers, we understand the importance of following the rules of the road and the significance of even the smallest errors.

But sometimes, mistakes happen, and it's important to take them as lessons and improve our driving skills continually.

View attachment 17231

A Google Maps view of the controversial Townsville, Queensland, intersection. Credit: Google Maps.

It's not uncommon to find ourselves in situations where road design can be confusing or unclear, and it seems that many Reddit users sympathised with the driver's predicament.

Some suggested that the intersection was to blame for its unclear lane markings and signage. One commenter wrote, 'I think it's more a case of bad road design. It's ambiguous whether the added lane should be on the left or right (evident by you and the instructor disagreeing).'

Another user suggested that clearer markings were needed, 'They really should add dotted lines through the intersection to remove any doubt as to which lane goes where in cases like this where there is a different number of lanes on each side of the intersection.'

However, not everyone agreed with the driver's argument that the error was trivial. Some users believed that the examiner made the right decision in failing the driver for the mistake, with one commenter expressing, 'While it is unfair, I would say that it is a critical driving error. Screwing up lanes can cause serious accidents.'

Regardless of differing opinions, this serves as a cautionary tale to stay vigilant while approaching intersections and to always adhere to the rules of the road. We must keep in mind that any mistakes while driving can lead to serious consequences.

Additionally, it's crucial to continue advocating for better road designs and improvements to ensure safer driving conditions for everyone. Clear signage and markings can go a long way in preventing confusion and accidents on the road.

Key Takeaways

• A Reddit user failed his heavy vehicle driving test in Townsville, Queensland after he failed to change lanes in an intersection.
• Some users sympathised with the driver, suggesting that the intersection's road design was confusing and could have benefited from clearer lane markings and signage.
• Others believed that the examiner made the right decision in failing the driver, emphasising the importance of following the rules of the road and avoiding even minor mistakes while driving.

Aside from this incident, there was another story that recently made waves on social media. A dashcam video shared by a Melbourne driver shows a white SUV entering the left lane of a major road from a side street, almost colliding with a Honda HR-V in the right lane. While it seems like a clear-cut case of right-of-way, opinions differed among commenters, leading to a heated online debate.

Click this link to read the full story and join the discussion!

In conclusion, this incident highlights the importance of remaining vigilant and following the rules of the road while driving. Even minor mistakes can have major repercussions, and it's crucial to stay aware of one's surroundings and make necessary adjustments.

At the same time, advocating for better road designs and improvements to ensure safer driving conditions for everyone is equally important. By working together, we can minimise the risks and ensure that our roads are safe and accessible to all.

View attachment 17232

Make sure you brush up on your road rules so you can make informed decisions while driving. Credit: Unsplash/Rolando Garrido.

What do you think about the intersection's road design and its impact on the driver's mistake? Do you believe that the examiner's decision to fail the driver was fair, or do you think it was too harsh?

How do you ensure that you remain vigilant and avoid making mistakes while driving, especially in unfamiliar or ambiguous road conditions? Let us know your thoughts and insights in the comments below.

Stay safe on the roads always, members!

Sorry, not driving into the correct lane is a failure. In a real situation, you are putting yourself and others at risk. More attention to the driving test must be given when entering a roundabout. Many drivers are unable to read the traffic and freeze. Many drivers are unable to keep in their lane and switch lanes as they turn and end up in other drivers' lanes. Failure to do so should be a no-go for a license.

 

[Trudi]

Not Typical Queensland at all. Try NT, WA or even SA, although I do agree Qld Signage has a lot to be desired.

During the more than 20 years of living and driving in WA, I have never encountered this. I have also lived in SA for about 1/2 year and still do frequent trips there - the most recent one was last month. Again, I have never encountered this.

 

[Vet543]

Despite acknowledging his mistake, the driver expressed his frustration, 'I just fail to see how that can be a “critical driving error” and fail my whole test for a mistake that is easy to make. I literally just drove in a straight line.'
It's easy to relate to the driver's frustration and disappointment, especially when you've put in the effort and time to prepare for a test. As drivers, we understand the importance of following the rules of the road and the significance of even the smallest errors.
But sometimes, mistakes happen, and it's important to take them as lessons and improve our driving skills continually.

All of this is perfectly understood, and under a slightly different situation the result could be catastrophic.
We all know the rules at School Zones (it is 40kph during school hours)... WHY. well many studies show that school kids 14yrs and YOUNGER can look at oncoming traffic and they DONT REGISTER THE DANGER. That is well known by so many people and what happens when you are travelling on a busy highway between towns (two lanes, one each way) the limit is 100kph ... and up front you see a School Bus with flashing indicators (as they are required to do) and you are travelling 100kph NOT breaking any rules. As you are passing the School bus a 13yr old boy appears in front of you crossing the road. He saw you but it didn't register in his mind.
He is now DEAD .
Who is right and who is wrong ... The School Bus driver, the School Boy, or YOU? No one broke rules that are applied by the department. Now IF you were cautious and remembered the School Zone Regulation (you see? no rules, markings or signs) then this innocent young healthy footballer boy would still be alive.
Even though there are no signs or rules here then thinking defensive driving tactics, You would have saved a young and important life.
That, my friends, is a true story, it happened 1.5km from my place.
So rules of safety APPLY when there is NO indicators to prompt a driver.
The young fellow getting a heavy duty licence to drive a huge vehicle is simply someone with a bigger gun, and that someone needs to be a bit more cautious than a regular driver (Wouldn't you agree?)

He must have had a good reason to be in the right lane, as trucks are required to remain in the left lane unless needing to turn right, enter a roadway instead of (All Vehicles must turn Left) situation when he is travelling straight ahead. Something seems to be missing in this story.
Sure, the examiner was seemingly petty and harsh on this driver, so the debate is with her NOT US.